The self -made PC – cost -effective, powerful, expandable

While smartphones and tablet computers conquer ever larger market shares and thus let the paragraph of the PCs shrink again, it is also the case that the demands on the desktop PCs are increasingly specific. So it is not surprising that the need for computers also decreases significantly. In spite of all the calls, however, this does not mean the downfall of the home computer, but rather represents a form of the global megatrend of individualization, because those who have special requirements for a PC can now realize them in the form of a self-made PC. In any case, the advantages are clearly obvious.

Why the self-made PC has an advantage

The PC, as it was often offered by Aldi and Co a few years ago, was sufficient and is still sufficient today for the requirements of casual users who only want to surf the Internet on the Internet and do private office work. However, both players and professional users make specific requirements that most standard devices cannot meet. This is usually due to the fact that as part of the configuration, little value was placed on the performance harmony of the built -in components. What is admittedly a little spongy, for example, affects the installation of a processor with as many cores as possible or a very high core clock, which at the same time has a manageable cache. For the Office user, the difference to a CPU with adequate cache is hard to determine, but for enthusiasts such components represent a bottle neck, which may also slow down the other components with regard to performance. In the context of this harmony deficit, manufacturers of standard PCs also like to use tricks and install huge hard drives and large amounts of RAM, with important performance details such as the clock or the writing speed that are not familiar to the layperson in the small print.

What should be considered in the context of the compilation?

The self-made PC, on the other hand, enables a PC to create according to its own requirements and to coordinate the components in such a way that no performance-based bottle necks arise. In addition, a specially composed computer may even be cheaper than a model from the electrical retail trade, since the PC can be put together much more targeted and possibly unnecessary performance components (powerful 3D graphics cartridges an Office PC) are unnecessary. In order to be able to exploit this advantage, however, in addition to sufficient expertise regarding the computer hardware, a requirement for a requirements is required to find out which components are required for the gaming PC or the professional workstation. If you are not a proven expert in this area, you can also take advantage of numerous configuration assistants and special hardware sites such as pcgameshardware.de or ht4u.net.

Regardless of whether it should be a computer for gaming or a powerful workstation for video editing or 3D modeling, when putting the components together, care must be taken to ensure that the mainboard and the CPU in particular meet the requirements. At this point, no false stinginess should be shown, because the core components mentioned are the basis for the performance of the entire computer. In addition, a reasonable mainboard and a good CPU with a large cache memory guarantee the longevity of the PC. For reasons of later expandability of the computer with additional memory or another SSD hard drive, there should also be a value on numerous connection options and slots in the event of the mainboard.

Online services make the project easier

However, the final selection of the components is sometimes complex, since various CPU sockets, chip sets and storage types are not necessarily compatible with each other. Both hardware portals, online forums as well as configuration aids such as the so-called PC builder from Alternate remedy, which allows only the combination of compatible components. Due to the filtering according to specific properties, it is not only possible to put together experts to put together an optimal PC. However, the components should also be ordered on the Internet, since these are usually not available as solo parts in stationary trade or, in case of doubt, comparatively expensive. Online comparison portals such as experiences.com help, however, to find the best and cheapest online shops. However, the price does not only count, because both the service and the quality of the provider are included in the overall rating. If you do not trust the assembly or want to avoid it, some online shops can also fall back on such a service, but of course you have to remunerate. However, the advantage in this regard lies in the full guarantee for the device. However, this does not mean that screwdrivers, which also assemble their self-construction PC on their own, have to do without a guarantee in the case of defective or incompatible components, because in addition to the manufacturer's guarantee, the 14-day return right, which is anchored in online trading, also applies.

The hardware components for the self-construction PC should usually be ordered in online shops, since they are usually not available as individual parts in retail or, as is often the case, the case is offered at a higher price. Not only should you pay attention to the price, but also counts the quality and service of the provider, because in the worst case there may be problems with the handling of warranty cases and returns. Online comparison portals can help find online shops that are cheap and have the right components in stock. A current bargain offer that optimally rounds off a self-made PC can be found on the Mein-Deal.de website.

Conclusion

The bottom line is that the advantages of a self-made PC predominate for most users. Extendability, cost savings and balance of the components are only a few advantages that the self -made implies. Anyone who is based on this project on your own project saves ERGO cash.

Intrografik: © 3dmentat – Fotolia.com

(23 votes, average: 4,80 out of 5)

Loading…